708 CE/HCP4AH
Precision ball bearing > High precision angular contact ball bearing
708 CE/HCP4AH - High precision angular contact ball bearing - Precision ball bearing
| Product model | 708 CE/HCP4AH |
|---|---|
| d | 8 mm |
| D | 22 mm |
| B | 7 mm |
| Limiting speed | 200000 r/min |
| d1 | 12.1mm |
| d2 | 11.5mm |
| D1 | 17.9mm |
| Lubrication hole diameter (K) | 0.5mm |
| C1 | 4.25mm |
| r1,2 | min.0.3mm |
| r3,4 | min.0.15mm |
| a | 5.6mm |
| da | min.10mm |
| db | min.10mm |
| Da | max.20mm |
| Db | max.20.6mm |
| Fillet radius(ra) | max.0.3mm |
| Fillet radius(rb) | max.0.15mm |
| Fuel injector position(dn) | 13.3mm |
| Pu | 0.025kN |
| Oil and gas lubrication can reach the speed | 130000r/min |
| Contact angle(α) | 15° |
| Ball diameter(Dw) | 3.969mm |
| The number of pages(z) | 8 |
| Reference grease quantity(Gref) | 0.17cm³ |
| Preload level A(GA) | 15N |
| Static axial stiffness of preload level A | 11N/µm |
| Preload class B(GB) | 35N |
| Static axial stiffness of preload class B | 16N/µm |
| Preload level C(GC) | 75N |
| Static axial stiffness of preload level C | 22N/µm |
| Correction factor depends on bearing series and size (f) | 1.02 |
| The correction factor depends on the contact angle(f1) | 1 |
| Correction factor, preload class A(f2A) | 1 |
| Correction factor, preload class B(f2B) | 1.03 |
| Correction factor, preload class C(f2C) | 1.05 |
| Correction factor of hybrid ceramic bearing(fHC) | 1.01 |
| Calculation coefficient(f0) | 6.6 |
| Weight | 0.011kg |
Request a Quote for this Product
708 CE/HCP4AH / High precision angular contact ball bearing / Precision ball bearing